Bits

The tongue port bar has a specially flattened shape to the port. This means the tongue has an optimum amount of room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to put the tongue over the bit, as the port effectively prevents this. Therefore this bit is eminently suitable for horses that do not tolerate conventionally shaped bits due to the pressure on the tongue and react with head-tossing and the like. The loose ring means a greater mobility of the bit in the mouth. This snaffle bit is therefore a bit for horses that prefer a "more mobile" bit in their mouth.

Beris PRIME sets new standards in communication between horse and rider. Due to the correct anatomical shape of the extremely soft mouthpiece, the pressure is equally distributed on the tongue and bars. The integrated oval bit guards with carefully shaped transition to the middle part prevent pinching of the horse‘s lips and additionally provide good lateral support. The loose ring means a greater mobility of the bit in the mouth. The loose ring bit is therefore a bit for horses that prefer a "more mobile" bit in their mouth. The ring runs very evenly in the copper sockets and, due to the better durability, increases the working life of the bit considerably.

Identical in shape to the Comfort Bar, just the thickness is a lot thinner at 15 mm. This makes the bit an ideal one for ponies and horses with limited room in their mouths. Very successful in use as a dressage bit on horses for whose mouth a thick Weymouth bit and bradoon would be too much.

Identical in shape to the Comfort Bar, just the thickness at 15 mm is a lot thinner. This makes the bit ideal for ponies and horses with limited room in their mouths. Very successful in use as dressage bit on horses whose mouth cannot take a thick Weymouth and bradoon.

Konnex bar, thin. At last our beris Konnex is also available in sizes 110, 120 and 130 mm! Identical in shape to the Konnex bar thus far, we have now slimmed down the Konnex thin bar in line with the requirements of sport ponies and thoroughbreds. At only 15 mm thick, the thin Konnex bar is just right for pony lips as is the likewise proportionally slimmed down port. The Konnex thin bar is also recommended as a dressage bit for horses and ponies who cannot take a thicker bit in a double bridle with a bridoon. The pony bits are supplied with side parts correspondingly reduced in size!

Form and function meet design! Our new single and double-jointed plastic mouthpiece is particularly slim in its dimensions - a broad contact surface and low height ensure more comfort in smaller horse mouths. The surface of the plastic is very smooth and slides well in the mouth, even when horses produce little saliva. The mouthpiece lies on the tongue and lips with its broad contact surface and subtly transitions into a smoothly modelled and rotated, fitted olive shape. Pinching of the lips is impossible! The joint and also the central piece is processed very finely and then adapted to the minimal height of the mouthpiece when fitted. The copper sockets fitted into the side olives enable an almost resistance-free, smooth sliding of the bit rings.

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more relaxation and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore, this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking and the like. The shaped transition from the mouthpiece to the bit rings makes pinching of the lips impossible and also provides the bit with a particularly stable lateral hold.The shape of the bit is well suited to working with young horses.

The eggbutt bar is a universally deployable mouthpiece, it sits very quietly in the horse‘s mouth and the eggbutts effectively prevent pinching of the lips. The bit fits perfectly in the mouth due to its slight curve. Pressure on the rein alters the angle of the bit in the mouth and, due to its special design, produces an increased effect on the bars and tongue. The shaped transition from the mouthpiece to the bit rings prevents pinching and additionally provides the bit with particular lateral stability and hold. The shape of the bit is particularly suited to working with young horses.

Providing the combined effect of a port and the positive characteristics of the butterfly bar, the profile of the beris KONNEX bar is slimmer and it positions itself very comfortably in the horse’s mouth. There is also more room available as the port in the beris KONNEX bar is significantly wider. Suitable for horses with little space in the mouth e.g. thoroughbred types or older horses (due to change in tooth alignment), horses with large tongues and, in particular, ones sensitive to pressure points on the tongue. The bit sits perfectly in the mouth due to its slight doming. Pressure from the reins alters the angle of the bit in the mouth and its special shape causes an increased effect on the bars and tongue. 

Our new single- and double-jointed plastic mouthpiece is particularly slim in its dimensions - broad contact areas and a low height ensure more comfort even in smaller horse mouths. The surface of the plastic is very smooth and slides well in the mouth, even with horses that produce little saliva in the mouth. The mouthpiece lying on the tongue and lips with its broad contact surface, transitions subtly, merging into a rotated fitted eggbutt. The joints and middle piece are finely worked, and installed in such a way as to match the low height of the mouthpiece. We guarantee the bit rings sliding smoothly due to the incorporated copper sockets.

Precision rein management and subtle communication close to the ideal with the new single- and double-jointed bit from beris!

Our new single- and double-jointed plastic mouthpiece is particularly slim in its dimensions - broad contact areas and a low height ensure more comfort even in smaller horse mouths. The surface of the plastic is very smooth and slides well in the mouth, even with horses that produce little saliva. The mouthpiece lies on the tongue and lips with its broad contact surface and, with its smooth profile, subtly merges into a rotated fitted eggbutt. The joints and middle piece are finely worked, and installed in such a way as to match the low height of the mouthpiece. We guarantee the bit rings sliding smoothly due to the incorporated copper sockets.

Precision rein management and subtle communication close to the ideal with the new single- and double-jointed bit from beris!

Our new single - and double -jointed plastic mouthpiece is particularly slim in its dimensions - broad contact areas and a low height ensure more comfort even in smaller horse mouths. The surface of the plastic is very smooth and slides well in the mouth, even with horses that produce little saliva. The mouthpiece lies on the tongue and lips with its broad contact surface and, with its smooth profile, subtly merges into a rotated, fitted, olive shape. The joints and middle piece are finely worked, and assembled so as to match the low height of the mouthpiece. We guarantee that the bit rings slide smoothly as a result of the incorporated copper sockets.

Precision rein management and subtle communication close to the ideal with the new single- and double-jointed bits from beris!

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The 3 ring bit combines an effective lateral restriction, lever and lifting action in one. The degree of effect is selected by the different buckling possibilities for the rein. Buckled onto the bottom ring, taking up the rein exerts the effect of a short lever. 

The tongue port bar has an especially flattened shape to the port. This gives the tongue optimum room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to get their tongue over the bit, as the port effectively prevents this. This mouthpiece is thus eminently suited to horses that do not tolerate traditionally shaped bits due to the pressure on the tongue and react by head-shaking and the like. The Kimblewick bit is an effective combination of a lever effect on the branches of the horse‘s lower jaw, pressure on the poll and change of position of the bit inside the horse"s mouth.

Horses accept leather bits exceptionally well. Leather is a purely natural product, it promotes chewing and also the flow of saliva. The bit slides easily in the mouth thereby increasing well being. The processed leather has been vegetable-tanned and hand stitched. When moistened, the anatomically pre-shaped bit adjusts perfectly to the anatomy of the horse"s mouth. The loose ring means that the bit moves more in the mouth. The loose ring snaffle is therefore a bit for horses who prefer a more mobile bit. The ring runs very smoothly in the copper sockets, and the resulting better durability increases the life of the bit. In choosing the bit, one can also address the horse"s requirements.

Soft rubber mouth rings to protect the corners of the horse's mouth.

Soft rubber mouth rings to protect the corners of the horse's mouth.

Single jointed snaffle Sprenger.

Ergonomical shape allowing an even distribution of pressure.

With internal steel core. Waldhausen`s new rubber bits are made of food-safe polyurethane. Please make sure you only use rubber bits only on horses which tend to produce sufficient saliva.

Classic double jointed stainless steel eggbutt bits.

Classic double jointed stainless steel eggbutt bits.

Waldhausen"s new rubber bits are made of food-safe thermoplastic polyurethane. Please make sure only to use rubber bits on horses producing ample saliva.

The Original Apple flavoured bits by HAPPY MOUTH. Horses like the lasting apple taste of these bits, as it stimulates chewing activity.

The new anatomically shaped, stainless steel bits from Waldhausen are characterised by a mouthpiece that is adapted to the horse"s mouth. Excellent mouth positioning and even pressure on the tongue promote optimum chewing. Anatomical bits from Waldhausen encourage faster acceptance of the bit. They allow for more targeted control and influence on the tongue.

Classic double jointed stainless steel snaffle bits.

Classic double jointed stainless steel snaffle bits.

The gentle effect of the ergonomically shaped, double jointed mouthpiece in combinationi with a roller as the central component promotes the acceptance of the bit and the horse"s wellbeing. Made of mouth-friendly plastic, apple flavoured.

Classic two-piece stainless steel olive mouthpieces.

Classic two-piece stainless steel olive mouthpieces.

Waldhausen"s new rubber bits are made of high quality polyurethane. Please make sure only to use a rubber bit on horses producing ample saliva. Rubber is a soft material and is subject to natural wear and tear in the horse"s mouth. Wear can be increased if the bit is fastened too high up in the horse"s mouth and horses can chew the bit with their back teeth. This is why you should make sure the bit is fitted correctly.

The Original Apple flavoured bits by HAPPY MOUTH. Horses like the lasting apple taste of these bits, as it stimulates chewing activity.

The anatomically shaped, stainless steel bits from Waldhausen are characterised by a mouthpiece that is adapted to the horse"s mouth.

Classical jointed stainless steel snaffle bits.

Classical jointed stainless steel snaffle bits.

High-quality anatomical mouthpiece with a satin finish, characterized by even pressure distribution and precise signals.

High-quality anatomical mouthpiece with a satin finish, characterized by even pressure distribution and precise signals.

Self-adhesive, well-adhering bit bandage that reliably protects the horse's mouth from friction.

This mouthpiece is characterized by even pressure distribution. Made of hypoallergenic plastic. Well suited for horses that do not like cold/hard metal.

The ergonomic shape is comfortable and leaves room for the tongue. The mouthpiece is characterized by even pressure distribution. Well suited for horses that do not like cold metal.

Sprenger Nathe Standard mouthpieces are made of high-quality thermoplastic, which is an excellent shape-retaining material. Even pressure across the tongue and comfortable in the horse's mouth.

Three-piece snaffle bits Sprenger, made of stainless steel.

Double jointed eggbutt mouthpieces Sprenger, made of stainless steel.

Sprenger bit with copper and D-rings. The copper bits release a flavor that encourages the horse to chew and increase salivation.

French link snaffle bit.

Bit guards to to protect horses mouth corners.

Bit guards to to protect horses mouth corners.

Eggbutt single jointed snaffle bit.

Simple stainless steel single jointed snaffle bit.